Lift Truck Equipment Log

The Lift Truck Equipment Log provides an advanced, OSHA compliant system for operators to complete their pre shift forklift inspections. The Log comes in a weather resistant, hard plastic case complete with an attached pen and mounts inside the operator's compartment for easy access and protection. Besides inspection checklists, repair requests, near miss forms and accident report forms are included. The optional, fold-over Spanish "template" allows one book to function in both English and Spanish, which is very unique and a one of a kind feature. If you are looking for a cost effective forklift inspection checklist system, look no further than the Lift Truck Equipment Log! The Lift Truck Equipment Log can also be combined with the forklift lock out box to ensure your forklifts have a full lock-out/tag-out solution in the event of a unsafe condition.

Checklist Caddy

The Checklist Caddy provides a basic, OSHA compliant way for operators to complete their pre shift forklift and aerial work platform inspections. The Log comes in a weather resistant, hard plastic case complete with an attached pen and mounts inside the operator's compartment for easy access and protection. The two-part carbonless forklift inspection checklist forms ensure that one copy is with the forklift or aerial work platform at all times and the other is handed in to supervision or maintenance each shift. This forklift checklist inspection system ensures a good flow of communication on safety or maintenance issues every shift. The checklist caddy can also be combined with the forklift lock out box to ensure your forklifts have a full lock-out/tag-out solution in the event of a unsafe condition.

Anti-Blind Spot Mirror

The Forklift Anti-Blind Spot Mirror provides 220 degrees of continuous rearward viewing area for forklift operators. Unlike two mirror configurations, which have significant blind spots, the Forklift Anti-Blind Spot Mirror allows the operator a much wider, continuous view to the rear of the forklift. One glance shows the entire rear area of the forklift. The optional, magnet mount version allows each operator to easily position the mirror to their favorite position in just seconds. Note: OSHA does not require forklifts to have mirrors.

9" Dome Mirror w/ Tape Mount
DOME-1-D $39.95

9" Dome Mirror w/ Magnet Arm Mount
DOMEM-1-D $59.95

Forklift Lock-Out Box

OSHA requires forklifts to be removed from service when they are unsafe to operate. Just removing the key or telling people not to use them; may not be enough. The Forklift Lock-Out Box quickly and easily provides a secure method of OSHA compliant Lock Out/Tag Out for any type of forklift or aerial lift. It can also lock out chargers, batteries, propane cylinders and much more. Each Forklift Lock-Out Box includes one lock, five lock out tags and plastic ties. If you have multiple forklifts, you may have the locks keyed uniquely or identical, at no additional charge.

Lock-Out Box Kit (Includes box, lock/zip ties, 4 tags and keys)
$39.95 ea

SAFE-Belt ergonomic, forklift seatbelt

The Most Comfortable and Effective Forklift Seatbelt Your Operators Will Ever Wear!

• Arc style design improves operator comfort, flexibility and maneuverability. When forklift seatbelts are comfortable and convenient they are more likely to be worn and less likely to be defeated in some way.

• The yellow, spring action arm shows everyone around the seatbelt is not in use until it is buckled, helping ensure operators wear their seatbelts. The optional ignition isolation switch can prevent the forklift from being used unless the seatbelt is fastened.

• Durable and cost effective, about the same price as a standard OEM forklift seatbelt, but with many more features.

• Easy to install with basic tools. The bright orange belt color can be seen from long distances to ensure compliance.

• Complies with OSHA regulations.

Safe-Belt
SAFEBELT-R-C
$199.00 ea.

SAFEBELT-I-C w/ Ignition Isolation SwitchSafe-Belt
SAFEBELT-I-C
$219.00 ea.

Forklift Back-Up Handle

Reduce forklift operator back and neck strain and protect their hands with the Ergonomic Forklift Back-Up Handle. Forklift operators who travel in reverse on a frequent basis will sometimes put their hands outside the overhead guard to balance themselves, which exposes their hands to a potential pinch point. The Back-Up Handle gives them a safe and comfortable place to put their hands when in reverse. An Optional horn button activates the forklift horn so the operator does not have to remove their hand from the wheel to sound the horn. Attaches easily in minutes with no tools!

Back-Up Handle
BUPH-1-D $45.95

Back-Up Handle w/ Horn Button
BUPH-2-D $59.95

Improper fork tilt angle is the leading cause of racking and product damage. Even experienced operators can have difficulty judging the tilt of the forks when they are entering pallets high in racking systems. the Accu-Tilt shows the operator the angle of the forks at all times, reducing potential damage by piercing product or hitting rack. Accu-Tilt increases operator productivity by eliminating any guess work before lifting or lowering. Accu-Tilt will also show operators the correct fork angle when traveling and parking. Accu-Tilt is perfect for high stacking applications and works great with attachments such as paper roll clamps, carton clamps and push pulls to improve productivity and safety, as well as decreasing product damage

• Reduce product damage
• Reduce rack damage
• Reduce pallet damage
• Increase productivity

The Accu-Tilt installs on any counterbalance lift truck in minutes without any tools. You will love the benefits of the Accu-Tilt.

Accut-Tilt Level Indicator
ACCUTILT-B $169.95

Atrium Full Forklift Weather Enclosure

• Durable vinyl plastic
• Protects your operator's from weather while improving visibility
• Cold crack resistance down to -10°F
• Great for windy, cold and rainy conditions
• Securable with Velcro straps for easy installation
• Fits almost any standard sit down rider forklift, see sizing chart
• Prevents cold air, rain and snow from entering the operator's compartment

Standard size, fits up to 6,000 lb. capacity forklifts
ATR-1-F $239.00

Large size, fits 6,000 - 12,000 lb. capacity forklifts
ATR-2-F $255.00

Forkshield: Overhead Guard Forklift Weather Shield

This easy to install, forklift weather guard will protect your operators from nasty conditions.

• Attaches in only seconds
• Universal for all sit down rider forklifts
• SUPERCLEAR   material will not block overhead view
• Impact resistant   vinyl

Forkshield Weather Guard
FSD01-D $49.95

Solar Cap Forklift Sun Shield Cover

• No more squinting
  while transporting an
  overhead load
• Get more coverage with
  the see through visor
• Direct sun-light is blocked keeping cab temperature down
• Made from durable
   anti-glare material

Pedestrian LED Safety Spot Light

The Blue Safety Light consists of two bright blue, long life LED lights attached to the top of the forklift's overhead guard. It projects a large blue spot light onto the warehouse floor ahead of the direction of the truck's travel (Can be mounted to the front or rear of any forklift or both). This acts as a warning to approaching pedestrians.

Blue Safety Light features:

• Innovative visual safety device.
•Safeguards both operators and pedestrians.
•Can be used in conjunction with audible devices or existing strobes.
•Perfect for blind/low visibility intersections and cross aisles.
•2 long-life LED lights.
•Adjustable distance to blue spot according to your needs.
•Designed for warehouse and manufacturing applications.
•Multi-voltage works on forklifts and other industrial vehicles 12-48 volts.

Blue Safety Light
LEDSSL-B $275.00